NetUSB Flaw

It appears that a new flaw has been found on popular routers, that port 20005 is open on the WAN side of the routers. If the router has a USB Port.

I have tested my Vigor 2830 router and it appears to be OK.  I have also emailed them for an official response.  I shall update this post when I receive a reply.

NB: www.grc.com, is Steve Gibson’s site, pleases see the below link for further information about Steve. http://en.wikipedia.org/wiki/Steve_Gibson_(computer_programmer)

UPDATE: I had a reply from DrayTek, not much of one, confirming that this isn’t an issues on there devices.

 

 

Fun with BT VoIP/DrayTek/VDSL Vigor Routers

Recently I was involved in some work for a company that had a BT2Wire router. We wanted/needed to swap this out for a Draytek Vigor, this normally wouldn’t be an issue.   The issue this time around was that the BT2Wire had a couple of BT VoIP lines enabled and although only one was in use and the other was used for the fax, which isn’t ironic at all.

Also the Draytek needed to support VSDL (BT Infinity™, FTTC)… So a quick look at Draytek’s website, we required the 2860Vn-plus (here)

Issue #1, The Draytek wouldn’t logon to BT’s network.

For settings for this, see this video :

Issue #2, Configuring VoIP

This is were things get a bit funky.

Visit the www.bt.com/bbv, enter your account details and on the next page click the “Configure Hub/Router” link which will load a page with a red “Configure” button on it. Right click that button and select “Open in a new window”, the SIP account information sent to the Hub will be displayed in the web address bar (where you normally type in www.), highlight and copy the string into an application such as Notepad.  It will show as a single block of text so it will help to put a new line before each & sign for clarity.

It will look like this:

http://www.api.home/voipsetup.api?SIPTr … otocol=UDP
&SIPTransportPort=5060
&SIPRegistrarAddress=sip.bbvservice.nat.bt.com
&SIPRegistrarPort=5060
&SIPOutboundProxyAddress=www.bbvservice-560049x.bt.com
&SIPOutboundProxyPort=5060
&SIPProxyAddress=sip.bbvservice.nat.bt.com
&SIPProxyPort=5060
&SIPPhoneNumber1=05600******
&SIPCallerName1=
&SIPUsername1=05600******
&SIPPassword1=ABCDEFGH12IJK3L
&SIPPhoneNumber2=
&SIPCallerName2=
&SIPUsername2=
&SIPPassword2=
&SIPHashB=d171f7f6123fbce2e80446dc1b06a8fa
&SIPHashC=3f8b49b05078a0c0a5cd3d5c82c33f7a
&SIPHashD=777a74c8a8bb129636e6c3cbfae8a811
&SIPHash=4c8d061c965d073308634b261532a180

You can take this information and enter into the Draytek.

BBV settings